BB-UH104

Compact, USB hub has 4 high-retention ports to hold standard USB cables tight. 15 kV ESD protection. USB bus powered with 100 mA to downstream peripherals. Plug-n-play - no drivers. Brackets built in for panel, counter, flat surface mounting. USB cable sold separately.

BB-UHR204

BB-UHR204, 4-port USB hub, is designed and tested to heavy industrial EMC standards and is UL C1/D2 rated. High retention USB ports hold standard cables tight. USB cable included.

BB-UHR207

The UHR207 is a seven-port, industrial grade, non-isolated USB hub. It is designed and tested to meet heavy industrial EMC standards and is UL listed for Class1/Division2 hazardous locations allowing operation where standard office-grade hubs fail – such as near variable frequency drives, motor control centers, welding and other large electrical loads. High retention USB connectors hold standard USB cables tight and are perfect for high vibration applications – requiring up to 3.2 lbs-force to disconnect them. USB cable included. The USB hub is powered from an external 10 to 30 VDC source (not included, sold separately). Two power connectors are provided – terminal block or threaded/lockable barrel plug. Each downstream port provides up to 500 mA of power to connected USB devices. (Refer to ordering information for power supply requirements and recommendation.)

BB-UHR304

BB-UHR304, 4-port USB hub, is designed and tested to heavy industrial EMC standards and is UL C1/D2 rated. 4kV isolation between upstream and downstream ports. High retention USB ports hold standard cables tight. USB cable included. External power source required, sold separately.

BB-UHR307

BB-UHR307, 7-port USB hub, is designed and tested to heavy industrial EMC standards and is UL C1/D2 rated. 4kV isolation between upstream and downstream ports. High retention USB ports hold standard cables tight. USB cable, 1.8m, included. External power source required, sold separately.

BB-USBHUB4OEM

Model USBHUB4OEM is a four-port, high-speed, USB hub intended for OEM applications where space is at a premium and external packaging is not required. High ESD protection makes it suitable for use in electrically harsh environments. Full speed (480 Mbps) USB 2.0 support allows connectivity with modern computer technology. High retention USB ports on the upstream and downstream sides allow you to use standard off the shelf USB cables while being confident that they will not come loose during operation. When installed in your system, the USBHUB4OEM appears as an unbranded USB hub. The hub is powered entirely by the USB host port, leaving your installation uncluttered by power cabling. As a bus powered device, it provides 100 mA of power to downstream peripherals which is adequate for most applications. Important: check your device to be sure this power is adequate. If it needs more power, B B SmartWorx has a variety of externally powered hubs to select from.

BB-USH204-B

Introducing the Model ULI-414H (BB-USH204-B): a 4-port industrial USB 3.2 Gen 1 (5Gbps) hub featuring 15 kV air ESD protection and 1 kV surge protection. Encased in metal with chassis ground, it offers superior robustness compared to office-grade hubs. This hub is backward compatible with USB 2.0/1.

BB-USH207-B

A 7-port industrial USB 3.2 SuperSpeed 5Gbps hub, which is backward compatible with USB 2.0/1.x. Each downstream port supports up to 2.4A, with a maximum of 42W. The ULI-417H features 15 kV (level 4) air ESD protection and 1kV surge protection, requiring external power.

ULI-417HC

USB-4630

ULI-414HCL - 4-Port Isolated USB 3.0 SuperSpeed Hub